JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.
is designed for hobby greenhouses and smallholdings.
As the working bodies used: irrigation drip tube length of 25 meters and a diameter of 8 mm with built-in drip emitters (the distance between emitters - 30 cm or 20 cm), filter screen, valve and controller. The kit also includes 5 m of connecting pipe diameter 8 mm and a set of fittings.The system is designed for watering the greenhouse area of 18 - 30 square meters. It is suitable for seasonal or year-round greenhouses. As water supply source can be use as technical or potable water. Purification of water for irrigation is carried out by the screen filter.
Water is supplied through a tube to the 4 lines of PE drip pipes laid along the beds with plants. The irrigation system is controlled by a timer-controller and does not require constant monitoring. Watering is carried out automatically on the set you are using. Installation of the system is very simple and takes no more than half an hour.
1
Filter screen 3/4''
2
Valve 3/4''
3
Tee 8 mm
4
Elbow 8 mm
5
Adaptor 3/4Fx1/2M
6
Nippel 1/2M
7
End line for drip tube
8
Controller G75-W with solenoid valve 1/2''
9
Drip tube diam. 8 mm, length 25m
10
PE tube diam. 8 mm, length 5m
To replace the filter screen to a disk or to select the distance between the emitters - please contact us
